Skip to content
Serving Sunrise and nearby cities Mon, Tue, Wed, Thu, Fri, Sat: 8 AM–6 PM · (561) 510-8212

Mural Installation in Tamarac, FL

The short answer

Luxury Wallpaper Installer installs wall murals in Tamarac homes, handling wall prep, panel layout, and seam alignment so the image reads as one continuous picture. Because South Florida stays humid much of the year, we check wall conditions and let materials acclimate before hanging. Tamarac is about five miles from our Sunrise base, so scheduling a visit is straightforward.

A wall mural can turn a plain living room, a child's bedroom, or a dining nook into the focal point of a Tamarac home. Luxury Wallpaper Installer hangs large-format murals for homeowners throughout Tamarac, in ZIP codes 33319 and 33321, from our base about five miles south in Sunrise. Murals are less forgiving than standard repeat-pattern wallpaper. Each panel holds one specific piece of a single image, so a crooked seam or a horizon line that steps up between panels shows right away. This page covers how we approach mural work in Tamarac homes, what your walls need beforehand, and what to expect on installation day.

Why Murals Need a Different Approach Than Regular Wallpaper

With repeat-pattern wallpaper, an installer can shift a strip slightly and the pattern still matches somewhere. A mural doesn't allow that. Panels are printed in a set order, and the image has to line up across every seam from ceiling to baseboard. If the first panel goes up even slightly off plumb, every panel after it compounds the error.

We start by deciding where the most important part of the image should sit: a face, a tree trunk, a skyline, or a horizon. Then we work outward from there so the focal point lands where you'll actually see it, not behind a sofa or cut off by a door frame.

  • Panels are checked against the printed sequence before any paste goes on
  • A plumb line is set from the planned focal point, not just the room corner
  • Extra image bleed at the top and bottom is trimmed to fit uneven ceilings and floors
  • Seams are matched by eye across the full height of each panel

Preparing Tamarac Walls for a Mural

Most Tamarac homes have painted drywall, which is a good surface for murals once it's smooth and properly primed. Before installation we look for nail pops, patched areas, old anchor holes, and texture that could telegraph through a thin mural material. Light texture often needs skim coating so the image doesn't look bumpy under side lighting from windows.

Humidity matters here. From May through October, the area is hot, humid, and wet, with frequent afternoon thunderstorms. November into April is drier, but there's no fully dry season. Moisture in the air and in the walls affects how paste cures and how some mural papers expand and shrink. We let materials acclimate in the room, check for damp spots, and keep the air conditioning running during and after the install.

Hurricane season runs from June 1 to November 30. If a storm has caused any water intrusion, the affected walls need to dry out completely before a mural goes up. Hanging over a damp wall can lead to bubbling, lifting seams, or mildew behind the paper.

Choosing the Right Wall and Mural Material

The wall you pick shapes the result. Long, uninterrupted walls work best for scenic murals, while accent walls behind a bed or a dining table suit bolder graphic designs. Walls broken up by outlets, windows, or vents can still work. We'll show you where those cutouts fall on the image before anything is hung.

Mural materials vary. Nonwoven murals are usually pasted directly on the wall and are easier to remove later. Vinyl-coated options hold up better to cleaning in hallways and kids' rooms. Peel-and-stick murals are popular, but they need a very smooth, well-cured painted surface to stay put in humid conditions. If you haven't ordered yet, we can measure the wall so the print size includes enough extra image for trimming.

What Happens on Installation Day

Most single-wall murals are hung in one visit, though larger walls or heavy prep can stretch longer. Here's the typical order of work:

  • Furniture near the wall is moved and floors are covered
  • Outlet and switch covers are removed
  • The wall gets a final check, and primer is applied if needed
  • Panels are laid out in order and the plumb line is marked
  • Panels are hung, seams matched, and edges trimmed at ceiling and baseboard
  • Covers are reinstalled and the work area is cleaned up

Serving Tamarac and Nearby Communities

Tamarac is a short drive north of our Sunrise base in Broward County, which makes site visits and follow-up easy. We also install murals for homeowners in North Lauderdale, Lauderhill, Margate, Lauderdale Lakes, and Plantation. Whether you're refreshing a condo bedroom or making a statement in a single-family home's great room, we'll talk through the wall, the image, and the timing before work begins.

More services in Tamarac

Related

What to expect

How a visit goes

  1. Prep Comes First

    Most wallpaper problems start with the wall underneath. We remove old paper and adhesive, patch holes and cracks, smooth rough areas, and prime before hanging so the new paper bonds to a clean, even surface.

  2. Clear Communication

    We explain what your walls need, how long the job should take, and what to expect on install day. If we find hidden damage once old paper comes down, we show you and talk it through before going further.

  3. Respect for Your Home

    We cover floors, move and protect furniture as needed, and keep the work area tidy. When the job is done, we clean up trimmings, paste residue, and debris so you can use the room.

FAQ

Common questions

Don’t see your question? Call (561) 510-8212 and we’ll talk it through.

Can you install a mural I bought online?

Yes. Send us the product details and wall measurements beforehand so we can confirm the print size includes enough extra image for trimming and that the material suits your wall.

Do you install peel-and-stick murals in Tamarac homes?

We do, but they need a smooth, fully cured painted wall to hold well in South Florida's humidity. We'll check your wall surface before recommending it.

Can a mural go over textured walls?

Light texture often shows through mural material. In most cases we recommend skim coating the wall first so the image looks smooth.

Is there a better time of year to install a mural?

Murals can be installed year-round. During the humid, wet months from May through October, we pay extra attention to wall moisture and keep the room air-conditioned while the paste cures.

How do you handle outlets and windows within the mural?

We plan where cutouts fall before hanging, so important parts of the image aren't lost. Outlet covers are removed and reinstalled over the finished mural.

Do you serve both Tamarac ZIP codes?

Yes. We work throughout Tamarac in 33319 and 33321, along with nearby cities such as Margate, North Lauderdale, and Lauderhill.

Ready to Talk About Your Wallpaper Project?

Tell us about your room, the paper you have in mind, and the condition of your walls. We'll schedule a time to look at the space and walk you through the next steps.

Request Service Call (561) 510-8212
Call (561) 510-8212 Request Service